I have a sony Viao, vgns360
Sony Viao looks like it have dis for the network card
Networking Type Integrated 10/100 Network Card • Integrated Wireless LAN
Data Link Protocol Ethernet • Fast Ethernet • IEEE 802.11b • IEEE 802.11g
De 10/100 kinda ok and it kapes of handling G but sometimes I doh truss dem onboard network cards.
I dont know how to to determine wha kinda wireless card I have...so in the router I just use the mixed setting.
Yeah I does leave dat as mixed but I does manage my router and have it set such dat if anyone decide that dey fass and want to hop on, I does get ah email with reverse lookup of where de hiding. Sometimes if I have time I does send dem a couple packets of goodies but lately I doh even boder. Yu might want to config the router to only accept G connections because yu primary laptop is ah G (that might help)
The laptop a few feet away from the router, it in the living room on a small table I moved it away from the entertainment center I have.
So yu does be right next to it when yu connecting den? I doh see no issue dey
ISP providing 2mb...I using flow cable.
Yu could kinda monitor your connection from de ISP and see if it is a constant 2mb.
Sometimes dem does lie, I does monitor rogers (CDN) from time to time just to keep dem honest
Yeah I have a key yuh hadda enter to hop on the network, this mac address ting...not sure of.
Keys can be broken in a matter of seconds if you have the right sniffer program. Yu have to set the router to either 64 Bit encryption key (or if yu feeling brave 128 bit) which is 10 digit hex code (usually dat is like Letters between A tu F and yu could add some numeric in dat too). Wid de 128 hex code is 28 characters ah think (harder to jus crack but again wid de right programs yu could crack dat). Den go to your wireless mac filter and enable dat, den either prevent or allow PC’s listed in the mac filter to access the router wirelessly. Den add each mac address to the list. Usually, yu mac address is located at the bottom of the laptop and for de Xbox it is at the back where the network connection is (but yu doh have to add the Xbox if it is wired. This is jus for wirless setup)
In the router settings, when I enable it and then hit the clone my mac address and I get the letters and numbers...I cyar browse the net atall...if I leave it disabled then I could use the net and the router stats picking up the ip address and subnet mask etc.
Doh clone yu mac address, waste of time for now.
Slowdowns happening all kinda time...in my compound it only have one youthman, a kinda buller who capable of this kinda ting. The rest is some clueless users. I have 4 other networks on my compound. All is WPA I running WPA2.
Again, the WPA and WPA2 is jus another layering of encryption dat is for extra security. I only use dis if I doing online banking and all dat. As I don’t and I doh have any real sensitive material on my pc (Beyond my porn collection) I jus use WEP and a strong key dat I routingly change every month and I change my password every month also. I filter through about 10 passwords that I will remember and change dem according to how I feel dat day. I also suspected dat everyone is broadcasting on channel 6, so all dem signals coming through everywhere. Change yu channel to 4 or 9 to get away from dem
How to find the Xbox Mac address and a the second Toshiba laptop that I occasionally bring home from the office and use.
Again, jus add the Mac address for this Tosh*tba (dis brand I doh like at all at all) to the mac filter list and when you try to login yu jus enter yu WEP id and password and Bob’s yu Uncle
I doh know what kinda wireless card I have...since I buy the Sony the ting does wuk.
Networking Type Integrated 10/100 Network Card • Integrated Wireless LAN
Data Link Protocol Ethernet • Fast Ethernet • IEEE 802.11b • IEEE 802.11g
Yeah yuh need a security code to come on the router...but that doh work...so I doesa hadda just leave it blank and use admin sometimes and start over.
Wuss thing yu could be doing, I believe now, wid dat info yu jus let pass dey dat de bulls hack into yu network and ressing hard pipe on yu. Doh ever leave yu admin as default. Make sure and set up yu SSID, Radio bandwidth to wide, and enable yu ssid to broadcast. Den do yu security setting (WEP, WEP, WEPA2) add yu ID.
The problem does happen all kinda time not set time of day or night.
I expected as much, everyone could be broadcasting on channel 6 so change it to something else
As for Bitter I have the latest router and the firmware looking like it is the most up to date one. People tell meh doh interfere with that.
Tell dem ppl to hull de a** LOL, doh bother wid dem, de only way to learn sometimes is to brick de system and buy another one if yu fu*k up the firmware. Google is yu best friend is dis situation. Google search updating firmware on the router type and yu go get all de necessary information. Sometimes yu find some real nuggets, but jus read and take note of the things dat were done. No need in reinventing the wheel.
I have the ver 1.5.00
The site have ver 1.5.00.19 I ent know if to tinker.
Thanks for the help people I fiddling still.
No more fiddling, reset yu router, den change yu wireless encryption key, change yu password, change yu broadcast signal. Den, go to yu wireless settings, enable mac filtering, and add yu 2 pc’s mac address. (Here is the choice, yu could either access the router from the listed mac addresses or not. This only means dat if yu have to make router changes yu have to hardwire back to the router no biggie). Den, connect each laptop and enter the information. (ie network name and encryption key) and Bingo, bango, bongo it should all work.
I think when I come to trini next year, yu doh have to buy me some beers for dis LOL